One Anderson in. Two Anderson out. No wiring, no crimping, no cutting into an existing loom.
Plug it into the Anderson socket you already have and you've got two — run your Starlink booster and a fridge off the same feed, or split a solar input between two circuits without pulling the setup apart.
Moulded boots over both connector bodies. Most splitters ship as bare plugs with the cable exposed where it exits the housing. That's the spot that fills with dust, and it's the spot that fatigues when the cable gets tugged. These are covered.
What it is
- 1 × 50A Anderson connector in
- 2 × 50A Anderson connectors out
- 10 AWG cable, rated to 200°C
- Moulded strain-relief boots on all three ends
- Grey housings — mates with standard grey 50A Anderson connectors
How much can you run through it
The connectors are rated 50A each, but both outputs share the single input — so 50A is the total, not 50A per side. Run a 30A fridge and a 15A booster and you're fine. Run two 40A loads and you're not.
If you're not sure what your gear draws, add it up before you plug it in.
Running two chargers in
You can use it in reverse — two sources into one battery — but check both sources are happy to run in parallel first. A DC-DC charger and a solar regulator feeding the same battery at once usually needs each one isolated. If in doubt, ask your auto electrician.
This is a splitter, not a fuse. Each branch still needs its own protection sized to whatever's on the end of it.
What people run off it
Fridge and diesel heater. Starlink booster and a light bar. Two solar blankets into one regulator. DC-DC charger and an inverter. Anything with a 50A Anderson connection on the end of it.
Fits
Any standard grey 50A Anderson connector. Anderson housings are colour-keyed and only mate with the same colour — if your existing plugs are red, blue or black, this won't connect.
What's included
1 × Anderson Plug Splitter. It arrives assembled and ready to plug in.
Australian supported. 12-month warranty.
Also sold elsewhere as an Anderson double adapter, piggyback lead, Y splitter or 2-into-1 connector. Same thing.