Shop

/

Collection

/

Anderson Plug Splitter – 50A 1 to 2 Double Adapter, Sealed Boots

VANKOR 50A Anderson plug splitter – 1 to 2 double adapter

VANKOR 50A Anderson plug splitter with red and black cable and sealed Anderson plugs

Anderson Plug Splitter – 50A 1 to 2 Double Adapter, Sealed Boots

Name: Anderson Plug Splitter – 50A 1 to 2 Double Adapter, Sealed Boots
Brand: VANKOR
SKU: VK-CBL-AND-Y50
Price: 24.0 AUD
Availability: InStock

$24 AUD

One Anderson in, two out — no wiring or crimping

10 AWG cable, rated to 200°C

Moulded boots on all three ends — dust and strain protection

50A total across both outputs, not 50A per side

Grey SB50 housings — mates with standard grey Anderson connectors

Plug it in and it's done. Nothing to install.

Fast Australia-Wide Shipping

30-Day Money-Back Guarantee

12-Month Warranty

Product Details

Run your fridge and your Starlink off the same Anderson plug. The VANKOR Anderson Splitter drops straight into your existing SB50 socket — pre-wired, moulded boots on all three ends. No cutting, no crimping.

One plug in, two out. Not just Starlink — anything with a 50A Anderson on the end of it. Fridge and diesel heater. Booster and light bar. Two solar blankets into one regulator.

DC-DC charger and an inverter. One thing to know before you plug it in: both outputs share the single input, so 50A is the total, not 50A per side. A 30A fridge and a 15A booster is fine. Two 40A loads isn't. Add up what you're running first.

Materials & Construction

10 AWG cable rated to 200°C — silicone insulation, not standard PVC. Stays flexible in the cold and doesn't go hard where it runs near a hot engine bay.

Moulded boots over all three connector bodies. Most splitters ship as bare plugs with the cable exposed where it exits the housing. That's the spot that fills with dust, and the spot that fatigues when someone tugs the cable. These are covered.

Grey SB50-pattern housings. Genderless, so each connector mates with any other of the same colour.

What's Included

1 × Anderson Plug Splitter

It arrives assembled and ready to plug in. Nothing to wire, nothing to crimp.

Installation & Maintenance

There's no installation. Plug the single end into your existing Anderson
socket and you've got two.

Before first use, add up what you're running. Both outputs share one 50A
input, so the combined draw is what matters — not what each device draws on
its own.

This is a splitter, not a fuse. Whatever protection your circuit has now
still applies, and each branch should be fused for the load on the end of it.

Keep the contacts clean and dry. Compressed air is enough if they get dusty.
Don't leave it hanging off a socket unsupported while driving — stow it so
the connector isn't taking the weight.

Maintenance

Keep the Anderson contacts clean and dry.
Remote batteries are CR2016 (2 per fob) — swap them if range drops off.
Wipe the housing down as needed; it's IP55, so a damp cloth is fine.

Shipping & Returns

Tracked delivery Australia-wide. Free shipping on orders over $100. You'll get a tracking link by email as soon as your order is on its way.

30-day money-back guarantee. Not happy? Email support@vankor.com.au with your order number and we'll sort it out.

12-month warranty against manufacturing defects.

Full details in our Shipping and Refunds Policy.

Vankor Starlink Anderson Plug Remote Switch — 12–72V Wireless Power Cut-Off, 30A

$97 AUD

30-DAY MONEY-BACK GUARANTEE — NO QUESTIONS ASKED

FAST AUSTRALIA-WIDE SHIPPING

FREE SHIPPING OVER $100

Australian Owned and Operated

FREQUENTLY ASKED QUESTIONS

Can I run 50A out of each side?

No. Both outputs share the one input, so 50A is the total across both, not 50A each. A 30A fridge and a 15A booster is fine. Two 40A loads isn't. Add up what you're running before you plug it in.

What can I run off it?

No. Both outputs share the one input, so 50A is the total across both, not 50A each. A 30A fridge and a 15A booster is fine. Two 40A loads isn't. Add up what you're running before you plug it in.

What can I run off it?

It's the standard grey 50A SB50 housing — the common one on caravans and 4WDs. Anderson housings are colour-keyed and only mate with the same colour, so red, blue or black plugs won't connect to this one.

Can I run two chargers into one battery?

It'll physically connect, but check first. Two sources feeding one battery at the same time usually needs each one isolated — a DC-DC charger and a solar regulator running in parallel without isolation can fight each other. Your auto electrician will know in about ten seconds.

Will it work with my Starlink booster?

Yes. The VANKOR boosters use a 50A Anderson input, so it plugs straight in — handy if you want the booster and something else running off the same socket. Just remember the 50A is shared between both sides.

Can I run a winch off it?

No. A winch pulls 200–400A under load, well beyond what a 50A connector or 10 AWG cable can carry. Run one through this and you'll melt it. Winches get their own heavy cable straight to the battery.

Is it waterproof?

The moulded boots keep dust and splash out of the cable entry, which is where these normally fail. They're not a tested IP rating. If it's going somewhere permanently exposed, mount it under cover.