Starlink Mini Booster – 12V/24V to 30V, Waterproof, Ring Terminals 3m

Name: Starlink Mini Booster – 12V/24V to 30V, Waterproof, Ring Terminals 3m
Brand: Jenny
SKU: VK-SL-PWR-RNG
Price: 65.0 AUD
Availability: InStock

$65 AUD

Your Mini won't hold a steady 12V. This lifts it to 30V.

Runs on 12V AND 24V — most boosters are 12V only.

IP68 — dust-tight and submersible. The one for a permanent install.

30V at 3.5A (105W) — headroom over the Mini's 60W startup spike.

Ring terminals, 3m cable — straight onto the battery posts, room to route it tidy.

Fast Shipping

30-Day Money-Back Guarantee

12-Month Warranty

Product Details

Your Starlink Mini takes 12-48V, so a 12V system looks like it should be fine. It isn't.

A real 12V system doesn't stay at 12V. The battery sags under load. You lose more voltage over Starlink's 15-metre cable. And the dish grabs around 60W on startup while it hunts for satellites — the moment it's hungriest is the moment your voltage is lowest. Dip under the minimum and you get dropouts, an unstable connection, or it won't power on at all. Usually the night you've parked up somewhere good.

The VANKOR Booster is a DC-to-DC step-up converter. It lifts your battery voltage to a steady 30V — the voltage Starlink specifies — with 105W of headroom. No inverter, no converting up to 240V and back down again, no wasted watts. Your batteries last longer and the system runs cooler.

It runs on 12V and 24V. Most boosters are 12V only — check the input range before you buy one. If it says 9-16V, it won't run your truck or your tractor. This one takes both.

This is the permanent-install version. Wire it in once, bolt it down, and never think about it again.

Materials & Construction

IP68-rated housing. Dust-tight and submersible — not "weather-resistant", not "splash-proof". Sealed. Mount it on the roof rack, run it under the van, take it on the boat. Rain, road spray, salt air, floodwater. It doesn't care.

Built-in fuse protection. Automotive-rated wiring throughout.

Input: 12V / 24V DC. Output: 30V DC, 3.5A max (105W). Connection: ring terminals, 3m cable.

Installation & Maintenance

This one hardwires. The ring terminals go straight onto your battery posts, and the 3m cable gives you the reach to route it properly instead of leaving it dangling.

Straightforward DIY if you're comfortable working on your 12V system — strip, crimp, bolt down, done. If you're not, get an auto electrician to do it, or grab the Anderson or Cigarette Plug version instead and skip the wiring entirely.

Once it's in, there's nothing to maintain. It's IP68 — leave it.

Shipping & Returns

Fast, tracked delivery Australia-wide, with free shipping on qualifying orders. Orders placed before 10am AEST ship the same day. Standard delivery takes 3–7 business days, depending on your location.

30-day money-back guarantee. If you're not happy, email support@vankor.com.au with your order number and we'll sort it out.

Starlink Mini Booster – 12V/24V to 30V, Waterproof, Cigarette Plug

$65 AUD

Starlink Mini 12V DC Power Supply — Anderson Plug variant with inline fuse and DC converter

Starlink Mini Booster – 12V/24V to 30V, Waterproof, Anderson Plug

$65 AUD

Australian Tough

FAST AUSTRALIA-WIDE SHIPPING

QUALITY TESTED

12-MONTH WARRANTY

Will this run my Starlink Mini off a 12V battery?

Yes — that's the whole job. It boosts your 12V (or 24V) battery to a steady 30V so the Mini runs directly off DC. No inverter, no 240V.

Is it waterproof enough to mount outside?

IP68 — sealed against dust and water. Under-tray, drawbar, canopy: all fine. Keep the connections reachable so you can check the fuse.

Does it ship free?

Orders over $100 ship free Australia-wide. Same-day dispatch before 10am AEST, delivery 3–7 business days, Australia and NZ.

What is the difference between this and a cheap 12V adapter?

Output stability and headroom. The Mini spikes on startup — cheap adapters sag and the Mini reboots. This holds a steady 30V at up to 3.5A (105W) through the spikes, and it's fused and sealed.