Kill power to your Starlink or 12V gear from your keyring. No crawling into the boot.
Shut your Starlink down overnight without unplugging a thing.
The Vankor Remote Power Switch drops straight into your Anderson SB50 setup — pre-wired both ends, fuse already fitted. No cutting, no crimping, no trip to the auto shop. Hit the fob from up to 100 metres and the power's off. Hit it again, it's back on.
Not just Starlink. It'll switch any 12–72V device in your setup up to 30 amps — fridge, camp lights, water pump, inverter, the whole DC circuit. One remote, whatever you've got plugged in.
Handy for killing your Starlink to stop it draining the battery overnight, or shutting everything down before you leave camp. Near-zero standby draw, so it won't flatten your battery sitting there.
Runs 12V right up to 72V, 30 amps. Control it three ways — two keyring remotes plus a magnetic panel switch. The panel switch sticks anywhere — stick the included steel disc to a wall or cabinet with the 3M tape, and the switch snaps straight on. Lift it off and move it whenever you like.
Built for the track. IP55 rated — dust, rain and washdowns don't bother it.
Made for: Starlink Mini setups, caravans, camper trailers, 4WDs, boats, off-grid rigs.
Features
- Switch any 30A device — Starlink, fridge, lights, pumps, inverters, or the whole DC circuit. Not just Starlink
- True plug-and-play — pre-wired Anderson SB50 both ends, inline fuse fitted. Drops straight in, no crimping
- Stick-anywhere panel switch — magnetic, snaps onto the included steel disc (3M tape). Mount it on any wall, lift it off any time
- Three-way control — two keyring remotes + the magnetic panel switch
- Reaches up to 100m — kill the power from inside the van or across camp
- Wide 12–72V, 30A — works across 12V and 24V setups
- Won't flatten your battery — near-zero standby draw
- IP55 rated — dust, rain and track spray shrug off
- Pairs up to 32 remotes — add fobs for the family, each independently coded
What's in the box
- 1 × Vankor receiver/switch unit — pre-wired, Anderson SB50 both ends, inline fuse
- 2 × keyring remote fobs (batteries fitted)
- 1 × magnetic panel switch — with steel mounting disc + 3M adhesive
Specifications
| Input voltage | DC 12V–72V |
| Max load | 30A |
| RF frequency | 433.932 MHz |
| Control range | 50–100m (line of sight) |
| Ingress rating | IP55 (dust + water resistant) |
| Operating modes | Self-locking, interlock, manual on/off |
| Remotes pairable | Up to 32 per receiver |
| Remote battery | 2 × CR2016 (fitted) |
| Operating temp | −20°C to 60°C |
| Standby current | ≤0.01 µA |
| Receiver size | 81 × 51 × 34 mm |
| Wire | 6mm², Anderson SB50 both ends, inline fuse |
FAQ
Does it only work with Starlink? No — it switches any 12–72V device up to 30A. Starlink, fridges, lights, pumps, inverters, the whole DC circuit. Note: it's a switch, not a voltage converter.
Where can I mount the panel switch? Anywhere — it's magnetic. Stick the included steel disc to a wall or cabinet with the 3M tape and the switch snaps on. Lift it off and move it any time.
Will it fit my Anderson setup? Yes — wired with SB50 plugs both ends, plugs straight in line. No cutting or crimping.
How far does the remote reach? Up to 100m in the open. Less through walls or metal.
Will it drain my battery? No — standby draw is near zero (≤0.01µA).
Can I run a winch off it? No. It's rated to 30A — suited to Starlink, fridges, lights and pumps, not high-draw gear.
Is it waterproof? IP55 — handles dust, rain and washdowns. Don't submerge it.