Shop

/

Collection

/

Vankor Starlink Anderson Plug Remote Switch — 12–72V Wireless Power Cut-Off, 30A

Vankor Starlink Anderson Plug Remote Switch kit — wireless 12–72V power cut-off with keyring fobs and magnetic panel switch

Wireless remote power switch with pre-wired Anderson SB50 plugs and inline fuse, plug-and-play

12–72V 30A remote battery disconnect for Starlink, fridges, lights and 12V gear

Magnetic panel switch on steel mounting disc for the Vankor Starlink remote power switch

IP55-rated wireless power cut-off switch for caravans, 4WDs, boats and off-grid Starlink setups

Vankor Starlink Anderson Plug Remote Switch — 12–72V Wireless Power Cut-Off, 30A

Name: Vankor Starlink Anderson Plug Remote Switch — 12–72V Wireless Power Cut-Off, 30A
Brand: Vankor
SKU: VK-SL-RSW-30
Price: 89.0 AUD
Availability: InStock

Kill power to your Starlink or 12V gear from your keyring.

$89 AUD

$119 AUD

Plug-and-play — Anderson SB50 both ends

No crimping, no cutting — drops straight in

Kill power from your keyring — up to 100m

Magnetic panel switch — snaps to any wall (steel disc + 3M tape)

Add the 12V/24V booster below — no inverter needed

IP55 — dust, rain and washdowns shrug off

Almost Sold out

Fast Shipping From Victoria

30-Day Money-Back Guarantee

12-Month Warranty

Product Details

Shut your Starlink down overnight without unplugging a thing.

The Vankor Remote Power Switch drops straight into your Anderson SB50 setup — pre-wired both ends, fuse already fitted. No cutting, no crimping. Hit the fob from up to 100 metres and the power's off. Hit it again, it's back on.

Not just Starlink — it'll switch any 12–72V device up to 30 amps: fridge, camp lights, water pump, inverter, the whole DC circuit. Control it three ways: two keyring fobs plus a magnetic panel switch that snaps onto the included steel disc, so you can stick it on any wall and lift it off any time.

Near-zero standby draw, so it won't flatten your battery sitting there. IP55 rated — built for the track.

Materials & Construction

Housing: tough PC (polycarbonate), IP55 sealed against dust, rain and track spray
Wiring: heavy 6mm² cable, pre-terminated with Anderson SB50 plugs on both ends
Protection: inline fuse fitted on the supply side
Relay: rated to 30A continuous, 12–72V DC
Panel switch: magnetic body + steel mounting disc with 3M adhesive backing
Operating range: −20°C to 60°C

What's Included

1 × Vankor receiver/switch unit — pre-wired, Anderson SB50 both ends, inline fuse
2 × keyring remote fobs (CR2016 batteries fitted)
1 × magnetic panel switch — with steel mounting disc + adhesive

Installation & Maintenance

Unplug your Anderson SB50 lead and plug this in line — between your power source and your gear.
That's the wiring done. No cutting, no crimping.
Pair the keyring fobs (or the panel switch) as per the quick-start card.
Panel switch: stick the steel disc to a clean, dry wall or cabinet with the 3M tape, then snap the switch on

Maintenance

Keep the Anderson contacts clean and dry.
Remote batteries are CR2016 (2 per fob) — swap them if range drops off.
Wipe the housing down as needed; it's IP55, so a damp cloth is fine.

Shipping & Returns

Ships fast from our Victoria warehouse, Australia-wide.
Shipping calculated at checkout.
30-day money-back guarantee.
12-month warranty.

Not just for Starlink Everyone sells these as a "Starlink switch." It's more than that. Any 12V to 72V gear in your rig — fridge, lights, water pump, inverter, the whole DC circuit — off and on from one remote. Up to 30 amps.

Plug and play, no crimping Most remote switches turn up as a bare relay you've got to wire yourself — crimp your own Anderson plugs, add your own fuse. Not this one. It arrives pre-wired with Anderson SB50 plugs on both ends and an inline fuse already fitted. Unplug your lead, plug this in line, done.

How it works (3 steps)

Plug it in line with your Anderson SB50 lead
Pair the two keyring fobs (or the panel switch)
Kill the power from up to 100m — no crawling into the boot

Won't flatten your battery Standby draw is near zero (≤0.01µA). Leave it wired in all season — it won't pull your battery down sitting there.

Magnetic Mount Kit 12/24V – Starlink Mini Mount + Power + Handle

$285 AUD

VANKOR steel mounting discs for Starlink Mini — 3M adhesive, 4 pack for magnetic mounts

Four VANKOR steel mounting discs for magnetic Starlink Mini mounts on fibreglass roofs

Steel Mounting Discs for Starlink Mini – 3M Adhesive, 4 Pack

$37 AUD

30-DAY MONEY-BACK GUARANTEE — NO QUESTIONS ASKED

SHIPPED SAME DAY FROM VICTORIA — ORDER BY 10AM

FREE SHIPPING OVER $100

Australian Owned and Operated

FREQUENTLY ASKED QUESTIONS

Does it only work with Starlink?

No — it switches any 12–72V device up to 30A. Starlink, fridges, lights, pumps, inverters, the whole DC circuit. Note: it's a switch, not a voltage converter.

Where can I mount the panel switch?

Anywhere — it's magnetic. Stick the included steel disc to a wall or cabinet with the 3M tape and the switch snaps on. Lift it off and move it any time.