Starlink Mini is the best thing to happen to off-grid internet in years. The dish is the easy part — getting it set up so it just works is where people come unstuck: mounted solid, powered clean, packed away in seconds. Here's the whole setup in one place. Fit it once and forget about it.
1. Mount it — the right mount for your roof
It comes down to one question: will a magnet stick to your roof? Grab a fridge magnet and test it.
- Steel roof → a magnetic roof mount. No drilling, no brackets, lifts straight off — also in white and a tilted version.
- Fibreglass, alloy or composite → stick on steel mounting discs (3M adhesive, no drilling) so your magnet has something to grab.
- Roof rack or bars → bolt-on roof rack feet. Set and forget.
- Smooth roof, no residue → the heavy-duty suction mount.
- Poles, ladders, awning rails → the pole mount clamp.
Not sure which? Full walk-through: Which Starlink Mini Mount Do You Need?
2. Power it — 12V that doesn't drop out
Here's what catches most people: the Mini wants a stable 12V or more, but a real battery system sags below 12V under load — and the moment it does, the dish reboots. It's almost never the dish. It's the power.
The fix is a 12V–24V DC power supply that holds voltage steady, run off an Anderson plug so it's plug-and-play. More detail: why cheap 12V setups drop out and do I need a booster?
3. Protect it and finish the job
- Wind deflector — leave the dish up at highway speed and it cuts drag and wind noise.
- Carry handle — pull the dish off and use it at ground level around camp.
- Tidy cable routing keeps the water out and the install clean.
The shortcut: grab a complete kit
Rather not piece it together? A Vankor Complete Kit gives you the mount, the 12V power and the fittings in one box — matched, tested and ready to bolt on. Fastest way from unboxed to online at camp, and it works out cheaper than buying the parts one by one.
What you actually need — quick pick
| Your roof | Mount | Add |
|---|---|---|
| Steel | Magnetic mount | 12V power supply |
| Fibreglass / alloy / composite | Magnetic mount + steel discs | 12V power supply |
| Roof rack / bars | Roof rack feet | 12V power supply |
| Smooth, no residue | Suction mount | 12V power supply |
| Pole / ladder / rail | Pole clamp | 12V power supply |
Why Vankor
Australian owned and operated, with real local support and same-day Express dispatch. We build gear to a standard we'd stake our own trip on — the sort you fit once and forget about, because it just works.
FAQ
Will a magnetic mount hold at highway speed?
Yes — Vankor magnetic mounts are rated for corrugated roads and highway travel. Add the wind deflector for long hauls.
My caravan roof isn't steel — can I still go magnetic?
Yes. Stick steel mounting discs to the roof first; the magnet grabs the discs for a full-strength, no-drill hold.
Do I need a booster or power supply?
If you're running off a 12V battery, yes — a DC power supply keeps the voltage stable so the Mini doesn't drop out.
Do I have to drill?
No. Magnetic, disc, suction and pole mounts all fit with no drilling. Only the roof rack feet bolt on, and that's your choice.